Garage Floor Screed · Devon
Garage Floor Screed Poured to SR1 in Pinhoe
Whether you're future-proofing a Pinhoe garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed Poured to SR1 in Pinhoe
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Pinhoe garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Pinhoe garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Pinhoe jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Pinhoe sits Exeter (3 mi), and we work the surrounding villages on the same week's diary.
Garage Floor Screed in Pinhoe — how it works
A typical Pinhoe single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Local facts that shape every Pinhoe pour
County
Devon
District
Exeter
Postcode
EX1
Nearest city
Exeter (3 mi)
Nearest motorway
M5 (J29, ~2 mi)
Primary A-road
A30 / B3181
Local industries
Pinhoe Quarry, new-build housing
Common builds
large new-build estates, station-side flats
Common briefs across Pinhoe
- Large new-build estates — a regular brief in Pinhoe
- Station-side flats — a regular brief in Pinhoe
- Small commercial units — a regular brief in Pinhoe
- Pinhoe Quarry — a regular brief in Pinhoe
- New-build housing — a regular brief in Pinhoe
Floors poured around Pinhoe
How a Pinhoe pour runs
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Proof from the Devon workload
Other areas we cover near Pinhoe
Specifications suited to Pinhoe builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Common Pinhoe build questions
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Pinhoe diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Pinhoe garage, we form it in the substrate first, then screed at constant thickness.
Can liquid screed take an EV charger and a car's weight in Pinhoe?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Pinhoe garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Pinhoe site clean and the floor protected with sheeting.
Can you do this on a single-garage budget?+
Yes — single-garage jobs are a regular run for us across Pinhoe. We'll give you a flat quote with no surprises.
Need Garage Floor Screed priced for Pinhoe?
Tell us the square metres and access notes. Most Pinhoe quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site