Garage Floor Screed · Devon
Poltimore Garage Floor Screed Specialists
Poltimore garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Poltimore Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Poltimore garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Poltimore jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Poltimore sits Exeter (4 mi), and we work the surrounding villages on the same week's diary.
Poltimore at a glance
County
Devon
District
East Devon
Postcode
EX4
Nearest city
Exeter (4 mi)
Nearest motorway
M5 (J29, ~2 mi)
Primary A-road
B3181
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Garage Floor Screed in Poltimore — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For Poltimore garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Who this is for in Poltimore
Poltimore sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Materials and systems we use in Poltimore
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Recent work near Poltimore
Trust points for a Poltimore brief
FAQs from Poltimore clients
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Poltimore site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Poltimore garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Poltimore diary.
Can liquid screed take an EV charger and a car's weight in Poltimore?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Poltimore garage usage.
Can you do garage conversions as well?+
Yes — full conversion floors with insulation, UFH and screed in one coordinated package across Poltimore and the surrounding area.
Within easy reach of Poltimore
Poltimore jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Talk to a Poltimore-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site