Garage Floor Screed · Devon
Garage Floor Screed for Brampford Speke Builds
Brampford Speke garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Brampford Speke Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Brampford Speke garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Brampford Speke jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Brampford Speke sits Exeter (5 mi), and we work the surrounding villages on the same week's diary.
Garage Floor Screed in Brampford Speke — how it works
For Brampford Speke garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
A typical Brampford Speke single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Why Brampford Speke site context matters
County
Devon
District
East Devon
Postcode
EX5
Nearest city
Exeter (5 mi)
Nearest motorway
M5 (J29, ~5 mi)
Primary A-road
A377
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Brampford Speke projects we see most
- Stone farmhouses — a regular brief in Brampford Speke
- Barn conversions — a regular brief in Brampford Speke
- Cottage extensions — a regular brief in Brampford Speke
- Occasional new-build cottages — a regular brief in Brampford Speke
- Agriculture — a regular brief in Brampford Speke
Brampford Speke-area projects
Step-by-step for a Brampford Speke job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Why Brampford Speke clients pick us
Nearby villages and towns
Cemfloor systems for Brampford Speke
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
What people in Brampford Speke usually ask
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
Can liquid screed take an EV charger and a car's weight in Brampford Speke?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Brampford Speke garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Brampford Speke site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Brampford Speke garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Brampford Speke diary.
Talk to a Brampford Speke-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site