Garage Floor Screed · Devon
Garage Floor Screed — Stoke Canon, Devon
Whether you're future-proofing a Stoke Canon garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed — Stoke Canon, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Stoke Canon garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Stoke Canon garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Stoke Canon jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Stoke Canon sits Exeter (5 mi), and we work the surrounding villages on the same week's diary.
Stoke Canon at a glance
County
Devon
District
East Devon
Postcode
EX5
Nearest city
Exeter (5 mi)
Nearest motorway
M5 (J29, ~4 mi)
Primary A-road
A396
Local industries
local retail, school and community builds
Common builds
1930s semis, estate new-builds
Typical Stoke Canon use cases
- 1930s semis — a regular brief in Stoke Canon
- Estate new-builds — a regular brief in Stoke Canon
- Kitchen-diner extensions — a regular brief in Stoke Canon
- Garden-room outbuildings — a regular brief in Stoke Canon
- Local retail — a regular brief in Stoke Canon
Garage Floor Screed in Stoke Canon — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Materials and systems we use in Stoke Canon
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Latest jobs across Devon
Within easy reach of Stoke Canon
What backs our Stoke Canon work
Stoke Canon screed questions, answered
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Stoke Canon site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Stoke Canon diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Stoke Canon garage, we form it in the substrate first, then screed at constant thickness.
Can liquid screed take an EV charger and a car's weight in Stoke Canon?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Stoke Canon garage usage.
From the first site visit to the final laitance sand, our Stoke Canon jobs are run as one fixed-price piece of work — no creeping extras.
Book your Stoke Canon pour
Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site