Garage Floor Screed · Devon
Sowton Garage Floor Screed Specialists
Garage floors in Sowton tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
Get a fixed price for Sowton Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Garage floors in Sowton tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
A typical Sowton single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Most of our Sowton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Sowton sits Exeter (3 mi), and we work the surrounding villages on the same week's diary.
Typical Sowton use cases
- Office parks — a regular brief in Sowton
- Distribution warehouses — a regular brief in Sowton
- Hotel buildings — a regular brief in Sowton
- Met Office support — a regular brief in Sowton
- Distribution — a regular brief in Sowton
Built for Sowton contractors and developers
Sowton skews commercial — trade parks like Sowton Industrial Estate, contractor-led fit-outs, and developer estates. We price as a sub-contractor on programme, with RAMS and CDM documentation issued ahead of mobilisation.
Garage Floor Screed in Sowton — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Cemfloor systems for Sowton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Step-by-step for a Sowton job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Latest jobs across Devon
Within easy reach of Sowton
What backs our Sowton work
Hundreds of square metres poured around Sowton in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Sowton screed questions, answered
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Can liquid screed take an EV charger and a car's weight in Sowton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Sowton garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Sowton site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Sowton garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Sowton diary.
Ready for a laser-flat floor in Sowton?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site