Garage Floor Screed · Devon
Cemfloor-Certified Garage Floor Screed Across Heavitree
Across Heavitree we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.
Get a fixed price for Cemfloor-Certified Garage Floor Screed Across Heavitree
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Heavitree we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Most of our Heavitree jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Heavitree sits Exeter (1 mi), and we work the surrounding villages on the same week's diary.
Heavitree at a glance
County
Devon
District
Exeter
Postcode
EX1
Nearest city
Exeter (1 mi)
Nearest motorway
M5 (J30, ~3 mi)
Primary A-road
B3183
Local industries
RD&E hospital, student lets
Common builds
Victorian terraces, hospital-adjacent flats
Typical Heavitree use cases
- Victorian terraces — a regular brief in Heavitree
- Hospital-adjacent flats — a regular brief in Heavitree
- Conversion HMOs — a regular brief in Heavitree
- RD&E hospital — a regular brief in Heavitree
- Student lets — a regular brief in Heavitree
Garage Floor Screed in Heavitree — how it works
A typical Heavitree single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Materials and systems we use in Heavitree
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Heavitree
Within easy reach of Heavitree
Proof from the Devon workload
- 01Cemfloor-certified, fully insured, CDM-aware
- 02Coordinated with most South West UFH installers
- 03Pre-start meeting standard on every commercial job
- 04Local knowledge — we know the M5 (J30, ~3 mi) access window and B3183 traffic patterns
Common Heavitree build questions
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Heavitree site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Heavitree garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Heavitree diary.
Can liquid screed take an EV charger and a car's weight in Heavitree?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Heavitree garage usage.
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
If you're planning Garage Floor Screed in Heavitree, the brief almost always comes down to flatness, dry-time and access — get those right and the trades behind you stay on programme.
Cemfloor-certified work near Heavitree
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site