Garage Floor Screed · Devon
Garage Floor Screed — Marsh Barton, Devon
Whether you're future-proofing a Marsh Barton garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed — Marsh Barton, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Marsh Barton garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Marsh Barton garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Marsh Barton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Marsh Barton sits Exeter (1 mi), and we work the surrounding villages on the same week's diary.
Local facts that shape every Marsh Barton pour
County
Devon
District
Exeter
Postcode
EX2
Nearest city
Exeter (1 mi)
Nearest motorway
M5 (J31, ~2 mi)
Primary A-road
A379
Local industries
trade counter, automotive
Common builds
trade-counter units, car showrooms
Garage Floor Screed in Marsh Barton — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Built for Marsh Barton contractors and developers
Marsh Barton skews commercial — trade parks like Marsh Barton Trading Estate, contractor-led fit-outs, and developer estates. We price as a sub-contractor on programme, with RAMS and CDM documentation issued ahead of mobilisation.
Cemfloor systems for Marsh Barton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Latest jobs across Devon
What backs our Marsh Barton work
Marsh Barton screed questions, answered
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Marsh Barton site visit.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Marsh Barton site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Marsh Barton garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Marsh Barton diary.
Can liquid screed take an EV charger and a car's weight in Marsh Barton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Marsh Barton garage usage.
Other areas we cover near Marsh Barton
Marsh Barton jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Cemfloor-certified work near Marsh Barton
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site