Garage Floor Screed · Devon
Garage Floor Screed for St Thomas Builds
St Thomas garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Ready for a laser-flat floor in St Thomas?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Get a St Thomas quote07791 510849 WhatsApp usGet a fixed price for Garage Floor Screed for St Thomas Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
St Thomas garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our St Thomas jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. St Thomas sits Exeter (1 mi), and we work the surrounding villages on the same week's diary.
Right fit for St Thomas homeowners and contractors alike
St Thomas runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.
St Thomas at a glance
County
Devon
District
Exeter
Postcode
EX4
Nearest city
Exeter (1 mi)
Nearest motorway
M5 (J31, ~3 mi)
Primary A-road
A377
Local industries
independent retail, hospitality
Common builds
Victorian terraces, riverside new flats
Garage Floor Screed in St Thomas — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
How a St Thomas pour runs
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Latest jobs across Devon
Specifications suited to St Thomas builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Within easy reach of St Thomas
St Thomas screed questions, answered
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your St Thomas diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your St Thomas garage, we form it in the substrate first, then screed at constant thickness.
Can liquid screed take an EV charger and a car's weight in St Thomas?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your St Thomas garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the St Thomas site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What backs our St Thomas work
Ready for a laser-flat floor in St Thomas?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site