Garage Floor Screed · Devon
Exwick Garage Floor Screed Specialists
Exwick garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Exwick Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Exwick garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Exwick jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Exwick sits Exeter (1 mi), and we work the surrounding villages on the same week's diary.
Why Exwick site context matters
County
Devon
District
Exeter
Postcode
EX4
Nearest city
Exeter (1 mi)
Nearest motorway
M5 (J31, ~3 mi)
Primary A-road
A377
Local industries
residential developer flow, schools
Common builds
Victorian terraces, hillside new estates
Exwick projects we see most
- Victorian terraces — a regular brief in Exwick
- Hillside new estates — a regular brief in Exwick
- School buildings — a regular brief in Exwick
- Residential developer flow — a regular brief in Exwick
- Schools — a regular brief in Exwick
Garage Floor Screed in Exwick — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For Exwick garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Materials and systems we use in Exwick
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Recent work near Exwick
Nearby villages and towns
Trust points for a Exwick brief
FAQs from Exwick clients
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Exwick?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Exwick garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Exwick garage, we form it in the substrate first, then screed at constant thickness.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Exwick site clean and the floor protected with sheeting.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Exwick diary.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
If you're planning Garage Floor Screed in Exwick, the brief almost always comes down to flatness, dry-time and access — get those right and the trades behind you stay on programme.
Coverage across EX4
From Exwick to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site