Liquid screed pour near Exwick Underfloor Heating Screed Specialists

Underfloor Heating Screed · Devon

Exwick Underfloor Heating Screed Specialists

Underfloor heating only works as well as the screed encasing it — and in Exwick that means a high-thermal-conductivity liquid pour that wraps every pipe with no voids.

Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Exwick Underfloor Heating Screed Specialists

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

Underfloor heating only works as well as the screed encasing it — and in Exwick that means a high-thermal-conductivity liquid pour that wraps every pipe with no voids.

The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.

Most of our Exwick jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Exwick sits Exeter (1 mi), and we work the surrounding villages on the same week's diary.

Why Exwick site context matters

County

Devon

District

Exeter

Postcode

EX4

Nearest city

Exeter (1 mi)

Nearest motorway

M5 (J31, ~3 mi)

Primary A-road

A377

Local industries

residential developer flow, schools

Common builds

Victorian terraces, hillside new estates

Exwick projects we see most

  • Victorian terraces — a regular brief in Exwick
  • Hillside new estates — a regular brief in Exwick
  • School buildings — a regular brief in Exwick
  • Residential developer flow — a regular brief in Exwick
  • Schools — a regular brief in Exwick

Underfloor Heating Screed in Exwick — how it works

For Exwick UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.

Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Exwick renovations.

Specifications suited to Exwick builds

Cemfloor Therm

Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.

PIR/Phenolic insulation board

70-150mm typical depending on build regs U-value target.

Edge insulation strip

Critical around UFH zones to allow thermal expansion.

Pressure-testing kit

Pipes held at 6 bar through the pour to flag any damage immediately.

Exwick-area projects

UFH screed laid over a coastal apartment in Exmouth
UFH screed laid over a coastal apartment in Exmouth
Self-build UFH pour near Tiverton
Self-build UFH pour near Tiverton
Open-plan ground floor poured for a new-build in Exeter
Open-plan ground floor poured for a new-build in Exeter

Why Exwick clients pick us

Backed by 5★ Google and Yell reviews from across Devon
Same-day quotes on most residential jobs
10-year Cemfloor manufacturer-supported guarantee on qualifying installs
Direct relationships with local insulation and UFH suppliers — fewer middlemen, fewer surprises

What people in Exwick usually ask

How does this affect my floor coverings in Exwick?+

Once commissioned and the floor moisture content is signed off (CM test, typically below 0.5% for tile), most coverings go down as normal. We hand you a commissioning record.

Will the screed crack as the UFH heats up?+

Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.

When can I switch the underfloor heating on in Exwick?+

On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Exwick clients to the schedule.

What if a pipe leaks during the pour?+

Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.

Does liquid UFH screed improve EPC ratings?+

Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.

What depth of screed over UFH pipes do you recommend?+

Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.

If you're planning Underfloor Heating Screed in Exwick, the brief almost always comes down to flatness, dry-time and access — get those right and the trades behind you stay on programme.

Coverage across EX4

From Exwick to the surrounding villages, we keep the radius tight so logistics stay simple.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp