Underfloor Heating Screed · Devon
Underfloor Heating Screed — Upton Pyne, Devon
Liquid UFH screed in Upton Pyne replaces the air gaps and voids that bog standard sand-and-cement leaves around pipes, lifting system response and cutting running costs.
Get a fixed price for Underfloor Heating Screed — Upton Pyne, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Liquid UFH screed in Upton Pyne replaces the air gaps and voids that bog standard sand-and-cement leaves around pipes, lifting system response and cutting running costs.
We pour Cemfloor Therm liquid screed over your UFH pipes at 50mm above pipe (typically 65-75mm total over insulation), giving full pipe encapsulation, fast thermal response and a finished surface flat to SR1.
Most of our Upton Pyne jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Upton Pyne sits Exeter (5 mi), and we work the surrounding villages on the same week's diary.
What Upton Pyne builds usually need
- Stone farmhouses — a regular brief in Upton Pyne
- Barn conversions — a regular brief in Upton Pyne
- Cottage extensions — a regular brief in Upton Pyne
- Occasional new-build cottages — a regular brief in Upton Pyne
- Agriculture — a regular brief in Upton Pyne
Built for Upton Pyne rural self-builders and farms
Upton Pyne sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Underfloor Heating Screed in Upton Pyne — how it works
For Upton Pyne UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Upton Pyne renovations.
Cemfloor systems for Upton Pyne
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
Step-by-step for a Upton Pyne job
- 1
UFH installer fits manifold, pipes and pressure-tests to 6 bar
- 2
We confirm edge insulation, DPM and pipe coverage depth
- 3
Pump and level the screed with pipes still under pressure
- 4
Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec
- 5
Floor coverings once moisture is signed off and commissioning is complete
Upton Pyne-area projects
Upton Pyne-area service radius
Why Upton Pyne clients pick us
- 01Cemfloor-certified, fully insured, CDM-aware
- 02Coordinated with most South West UFH installers
- 03Pre-start meeting standard on every commercial job
- 04Local knowledge — we know the M5 (J29, ~4 mi) access window and A377 traffic patterns
What people in Upton Pyne usually ask
Can you screed over wet UFH and electric UFH?+
Yes — Cemfloor Therm encapsulates both. Electric mat systems usually take a thinner cover; wet pipes need the 50mm minimum.
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
When can I switch the underfloor heating on in Upton Pyne?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Upton Pyne clients to the schedule.
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
Need Underfloor Heating Screed priced for Upton Pyne?
Tell us the square metres and access notes. Most Upton Pyne quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site