Underfloor Heating Screed · Devon

Underfloor Heating Screed — Dalwood, Devon

When Dalwood self-builders specify UFH, the screed is what makes the system efficient. We pump Cemfloor Therm directly around your pressure-tested pipework for full encapsulation.

Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Underfloor Heating Screed — Dalwood, Devon

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

When Dalwood self-builders specify UFH, the screed is what makes the system efficient. We pump Cemfloor Therm directly around your pressure-tested pipework for full encapsulation.

For Dalwood UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.

Most of our Dalwood jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Dalwood sits Honiton (5 mi), and we work the surrounding villages on the same week's diary.

Underfloor Heating Screed in Dalwood — how it works

The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.

For Dalwood UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.

EX13 access, routes and logistics

County

Devon

District

East Devon

Postcode

EX13

Nearest city

Honiton (5 mi)

Nearest motorway

M5 (J28, ~13 mi)

Primary A-road

minor B-roads

Local industries

heritage, agriculture

Common builds

Loughwood Meeting House precinct, cob cottages

What Dalwood builds usually need

  • Loughwood Meeting House precinct — a regular brief in Dalwood
  • Cob cottages — a regular brief in Dalwood
  • Small self-builds — a regular brief in Dalwood
  • Heritage — a regular brief in Dalwood
  • Agriculture — a regular brief in Dalwood

Recent work near Dalwood

Self-build UFH pour near Tiverton
Self-build UFH pour near Tiverton
UFH screed laid over a coastal apartment in Exmouth
UFH screed laid over a coastal apartment in Exmouth
Renovation screed for a barn conversion near Honiton
Renovation screed for a barn conversion near Honiton

How a Dalwood pour runs

  1. 1

    UFH installer fits manifold, pipes and pressure-tests to 6 bar

  2. 2

    We confirm edge insulation, DPM and pipe coverage depth

  3. 3

    Pump and level the screed with pipes still under pressure

  4. 4

    Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec

  5. 5

    Floor coverings once moisture is signed off and commissioning is complete

Trust points for a Dalwood brief

Cemfloor-certified installer — qualifying jobs covered by a 10-year manufacturer-supported guarantee
Fully insured, RAMS and method statements supplied for every commercial pour
Active diary across Devon — fresh Dalwood-area work most months
SR1 flatness as standard — within 2mm under a 2m straight-edge

Specifications suited to Dalwood builds

Cemfloor Therm

Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.

PIR/Phenolic insulation board

70-150mm typical depending on build regs U-value target.

Edge insulation strip

Critical around UFH zones to allow thermal expansion.

Pressure-testing kit

Pipes held at 6 bar through the pour to flag any damage immediately.

FAQs from Dalwood clients

When can I switch the underfloor heating on in Dalwood?+

On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Dalwood clients to the schedule.

What depth of screed over UFH pipes do you recommend?+

Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.

What if a pipe leaks during the pour?+

Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.

Does liquid UFH screed improve EPC ratings?+

Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.

Will the screed crack as the UFH heats up?+

Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.

Why use liquid screed over UFH rather than sand-and-cement?+

Liquid screed flows around the pipes with no voids, giving 20-30% better thermal response and lower running costs than a hand-laid screed. That's why most Dalwood UFH installers recommend it.

Book your Dalwood pour

Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp