Garage Floor Screed · Devon
Garage Floor Screed — Dalwood, Devon
Whether you're future-proofing a Dalwood garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed — Dalwood, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Dalwood garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Dalwood garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Dalwood jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Dalwood sits Honiton (5 mi), and we work the surrounding villages on the same week's diary.
Garage Floor Screed in Dalwood — how it works
For Dalwood garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
A typical Dalwood single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Why Dalwood site context matters
County
Devon
District
East Devon
Postcode
EX13
Nearest city
Honiton (5 mi)
Nearest motorway
M5 (J28, ~13 mi)
Primary A-road
minor B-roads
Local industries
heritage, agriculture
Common builds
Loughwood Meeting House precinct, cob cottages
Dalwood projects we see most
- Loughwood Meeting House precinct — a regular brief in Dalwood
- Cob cottages — a regular brief in Dalwood
- Small self-builds — a regular brief in Dalwood
- Heritage — a regular brief in Dalwood
- Agriculture — a regular brief in Dalwood
Dalwood-area projects
What to expect on pour day in Dalwood
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Why Dalwood clients pick us
Nearby villages and towns
Materials and systems we use in Dalwood
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
What people in Dalwood usually ask
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Dalwood garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Dalwood?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Dalwood garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Dalwood site clean and the floor protected with sheeting.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Dalwood diary.
Book your Dalwood pour
Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site