Garage Floor Screed · Devon
Garage Floor Screed for Yarcombe Builds
Yarcombe garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Yarcombe Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Yarcombe garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Yarcombe jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Yarcombe sits Exeter (24 mi), and we work the surrounding villages on the same week's diary.
Yarcombe at a glance
County
Devon
District
East Devon
Postcode
EX14
Nearest city
Exeter (24 mi)
Nearest motorway
M5 (J28, ~16 mi)
Primary A-road
A30
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Typical Yarcombe use cases
- Stone farmhouses — a regular brief in Yarcombe
- Barn conversions — a regular brief in Yarcombe
- Cottage extensions — a regular brief in Yarcombe
- Occasional new-build cottages — a regular brief in Yarcombe
- Agriculture — a regular brief in Yarcombe
Garage Floor Screed in Yarcombe — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Cemfloor systems for Yarcombe
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Latest jobs across Devon
Within easy reach of Yarcombe
What backs our Yarcombe work
Yarcombe screed questions, answered
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Yarcombe?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Yarcombe garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Yarcombe garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Yarcombe diary.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Yarcombe site clean and the floor protected with sheeting.
Yarcombe jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Ready for a laser-flat floor in Yarcombe?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site