Garage Floor Screed · Devon
Garage Floor Screed — Combe Raleigh, Devon
Whether you're future-proofing a Combe Raleigh garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed — Combe Raleigh, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Combe Raleigh garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Combe Raleigh garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Combe Raleigh jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Combe Raleigh sits Exeter (18 mi), and we work the surrounding villages on the same week's diary.
Local facts that shape every Combe Raleigh pour
County
Devon
District
East Devon
Postcode
EX14
Nearest city
Exeter (18 mi)
Nearest motorway
M5 (J28, ~13 mi)
Primary A-road
A30
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Garage Floor Screed in Combe Raleigh — how it works
A typical Combe Raleigh single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Right fit for Combe Raleigh rural self-builders and farms
Combe Raleigh sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Specifications suited to Combe Raleigh builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Combe Raleigh
Proof from the Devon workload
Common Combe Raleigh build questions
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Combe Raleigh diary.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Combe Raleigh site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Combe Raleigh?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Combe Raleigh garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Combe Raleigh garage, we form it in the substrate first, then screed at constant thickness.
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Other areas we cover near Combe Raleigh
Combe Raleigh jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Need Garage Floor Screed priced for Combe Raleigh?
Tell us the square metres and access notes. Most Combe Raleigh quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site