Heavy-duty industrial pours
Commercial & Industrial Floor Screeding — Units, Warehouses & Workshops
Slabs designed to take pallet trucks, MEWPs and daily forklift traffic. Poured to FM2 flatness, primed for epoxy or polyurethane coatings.
Price an industrial pour
Name, phone, email — we'll reply the same working day with a fixed price.
Or call our landline on 01392 237700
We provide industrial floor screeding in Exeter and across the South West. Industrial floors aren't residential floors that happen to be bigger. The loads are heavier, the flatness tolerance is tighter, the coatings are more demanding, and the pour has to be scheduled around a working site.
We pour industrial liquid screed across the South West for warehouses, trade parks, MOT bays, distribution units, workshops and light-manufacturing facilities. Shop units and cafés are covered on our retail fit-out screeding page.
Sizing an industrial pour
| Duty | Typical spec |
|---|---|
| Light storage / office | 40mm Cemfloor over insulation, FM3 flatness |
| Warehouse / trade counter | 50–60mm Cemfloor bonded, FM2 flatness, sealed |
| Forklift / pallet-truck traffic | 60–75mm cement screed, hardened wear coat |
| Wet processing / chemical exposure | Cemfloor + epoxy coating build-up |
What industrial pours demand that residential ones don't
- Racking-leg point-load design — spec the mix against calculated loads, not defaults
- FM-rated flatness surveys so racking installers don't reject the slab
- Coating-ready surfaces — profile matched to your epoxy or PU spec
- Programme integration with steel, cladding and mechanical trades
- Access strategy for pump trucks around live yard traffic
Running an industrial pour
- 1
Duty survey
We walk the site, get the racking layout and forklift specs, and lock down the design duty.
- 2
Mix design
Cement-based liquid screed selected against load and coating spec — no anhydrite here.
- 3
Prep
Insulation, DPM, edge foam and any embedded services checked. Datum pins to FM tolerance.
- 4
Pour
Volumetric pump for continuous flow. Passes crossed to avoid cold joints on very large slabs.
- 5
Cure & coat
Protected cure, moisture readings signed off, then coating contractor mobilised.
Commercial floor screeding for offices and retail
Not every commercial screed is a warehouse slab. Offices, clinics, showrooms and shop units need a flat, quiet floor for carpet tile, LVT or raised access floors rather than forklift duty. For these we usually lay a liquid screed over insulation, finished to the flatness the flooring contractor asks for, with moisture readings before coverings go down.
Fit-outs are often on tight programmes with other trades waiting, so the pour is planned around access and opening dates. Shop and café fit-outs are covered on our retail fit-out screeding page, and multi-unit or main-contractor work on floor screeding contractors.
Industrial floor screeding across Devon and Somerset
The same industrial and commercial screeding service runs from Exeter to our existing coverage in Taunton and Torquay. The Blackbrook pour in Taunton is an industrial-scale job, and the duty survey, mix design and flatness checks are the same wherever the unit is.
Warehouse screed and commercial screeds: what to send us
- Floor area and drawings, including any racking layout
- The duty: foot traffic, pallet trucks or forklifts
- The finish: coating, carpet tile, LVT or raised floor
- Access for the pump and the target pour date
Frequently asked
Commercial & Industrial Screeding by county
Price an industrial pour
Send us site drawings, racking layout and duty schedule. We'll come back with a full mix design and staged pour programme.
