Commercial Project Types
Liquid Screed for Gym and Studio Floors
A flat, well-consolidated screed base for gyms, fitness studios and yoga spaces, laid to support rubber, sprung timber or resin flooring above.
Gym and studio floors carry loads that a domestic or office floor never sees: dropped weights, repetitive impact from group classes, and heavy fixed equipment bolted through the finish. The screed beneath needs to be flat and consistent so the flooring system above performs and wears evenly.
Rubber tile, sprung timber and resin systems are all commonly specified in fitness environments, and each has its own preparation requirements, but all of them benefit from starting on a screed that is genuinely level rather than one that has been patched to hide dips. Impact loading from dropped weights and group exercise also means the substrate itself needs to be robust, not just flat.
We also see gym fit-outs within converted commercial units — old retail units, warehouses and mixed-use buildings — where the existing slab may be uneven or previously used for a different purpose, so an accurate assessment of the substrate is part of the early planning. Procurement is usually through a fit-out contractor working to the gym operator's specification and brand standards.
Gym & Studio Floor Screed — the points that decide it
- Flat, consistent base for rubber, sprung timber or resin gym flooring
- Suited to heavy point loads from fixed and free-weight equipment areas
- Can be specified to suit conversions of retail, warehouse or mixed-use units
- Laid across free-weight, studio and cardio zones as a single level plate
- Coordinated with equipment anchor points and floor-mounted services
- Compatible with underfloor heating in studio and reception areas
- Assessed against impact loading from dropped weights and group classes
- Existing slab condition surveyed before recommending overlay or rebuild
- Fit-out programme coordinated with equipment supplier delivery dates
A base that suits the flooring system above
Whichever gym flooring system is specified, its installer will have their own tolerance and preparation requirements. We finish the screed to a flatness that gives them a realistic starting point, reducing the amount of remedial work needed before rubber, sprung or resin flooring goes down.
Reception, studio and cardio zones often carry lighter, more decorative finishes than the free-weight area, so the screed specification and any levelling compound requirements are considered zone by zone rather than as a single uniform approach across the whole gym.
Fitting out converted commercial units
Many gyms and studios occupy converted retail, warehouse or industrial units rather than purpose-built premises. We assess the existing slab's condition and any previous use before recommending a bonded overlay, unbonded system or full screed build-up.
Warehouse conversions in particular can bring uneven, previously loaded slabs, and identifying this early avoids specifying a thin overlay where a more substantial build-up is actually needed to achieve a genuinely flat result across the whole floor plate.
Loading from equipment and group activity
Free-weight areas see repeated impact from dropped plates and bars, and fixed equipment such as squat racks or cable machines applies concentrated point loads through anchor bolts. We discuss the intended equipment layout with the fit-out team so the screed specification and any additional reinforcement reflect the loading each zone will actually see.
Group exercise studios bring a different kind of load — sustained, repetitive impact across a wider area rather than isolated points — which is a factor in choosing screed thickness and, where specified, the type of sprung or resilient layer above it.
Coordinating with the fit-out programme
Gym fit-outs often run on a tight programme tied to an opening date and coordinated deliveries of specialist equipment. We agree pour timing so the screed and its drying period are complete before flooring installers and equipment fitters need access, avoiding a clash between a heavy equipment delivery and a floor still curing.
Where the gym operator has brand-standard finish specifications, these are usually confirmed through the fit-out contractor, and we work to whatever screed specification and tolerance those standards require.
Planning a gym or studio fit-out?
Talk to us about your flooring system and equipment layout and we will specify the screed to suit.
Or call our landline on 01392 237700
Gym & Studio Floor Screed — your questions
In short
A flat, well-consolidated screed base for gyms, fitness studios and yoga spaces, laid to support rubber, sprung timber or resin flooring above.
Planning a gym or studio fit-out?
Talk to us about your flooring system and equipment layout and we will specify the screed to suit.