Garage Floor Screed · Somerset
Garage Floor Screed Poured to SR1 in Wells
Whether you're future-proofing a Wells garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed Poured to SR1 in Wells
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Wells garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Wells garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Wells jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Wells sits Bridgwater (15 mi), and we work the surrounding villages on the same week's diary.
Garage Floor Screed in Wells — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For Wells garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
What we plan around in Wells
County
Somerset
District
Somerset
Postcode
BA5
Nearest city
Bridgwater (15 mi)
Nearest motorway
M5 (J22, ~17 mi)
Primary A-road
A39 / A371
Local industries
independent retail, market-town hospitality
Common builds
Georgian townhouses, stone cottages
Where liquid screed earns its keep in Wells
- Georgian townhouses — a regular brief in Wells
- Stone cottages — a regular brief in Wells
- Small new-build estates — a regular brief in Wells
- High-street shop retrofits — a regular brief in Wells
- Independent retail — a regular brief in Wells
Recent work near Wells
What to expect on pour day in Wells
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Trust points for a Wells brief
Adjacent areas — usually same-week diary
Materials and systems we use in Wells
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
FAQs from Wells clients
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Wells garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Wells diary.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Wells site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Wells?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Wells garage usage.
Can you do garage conversions as well?+
Yes — full conversion floors with insulation, UFH and screed in one coordinated package across Wells and the surrounding area.
Book your Wells pour
Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site