Garage Floor Screed · Somerset
Garage Floor Screed — Street, Somerset
Across Street we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.
Get a fixed price for Garage Floor Screed — Street, Somerset
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Street we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Most of our Street jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Street sits Bridgwater (10 mi), and we work the surrounding villages on the same week's diary.
BA16 access, routes and logistics
County
Somerset
District
Somerset
Postcode
BA16
Nearest city
Bridgwater (10 mi)
Nearest motorway
M5 (J23, ~13 mi)
Primary A-road
A39
Local industries
independent retail, market-town hospitality
Common builds
Georgian townhouses, stone cottages
Garage Floor Screed in Street — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For Street garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Built for Street homeowners and contractors alike
Street runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.
Cemfloor systems for Street
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Recent work near Street
Trust points for a Street brief
- 01Cemfloor-certified, fully insured, CDM-aware
- 02Coordinated with most South West UFH installers
- 03Pre-start meeting standard on every commercial job
- 04Local knowledge — we know the M5 (J23, ~13 mi) access window and A39 traffic patterns
FAQs from Street clients
Can liquid screed take an EV charger and a car's weight in Street?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Street garage usage.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Street diary.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Street site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Street garage, we form it in the substrate first, then screed at constant thickness.
Can you do garage conversions as well?+
Yes — full conversion floors with insulation, UFH and screed in one coordinated package across Street and the surrounding area.
Street-area service radius
Whether it's a single-room retrofit or a full homeowners and contractors alike build in Street, the goal is the same — one pour, laser-flat, ready to take coverings without fuss.
Cemfloor-certified work near Street
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site