Garage Floor Screed · Somerset
Garage Floor Screed for Othery Builds
Othery garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Othery Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Othery garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Othery jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Othery sits Bridgwater (7 mi), and we work the surrounding villages on the same week's diary.
Othery at a glance
County
Somerset
District
Sedgemoor
Postcode
TA7
Nearest city
Bridgwater (7 mi)
Nearest motorway
M5 (J23, ~9 mi)
Primary A-road
A361
Local industries
Levels agriculture, rural haulage
Common builds
Levels farmhouses, raised new-builds
Typical Othery use cases
- Levels farmhouses — a regular brief in Othery
- Raised new-builds — a regular brief in Othery
- Converted longhouses — a regular brief in Othery
- Packhouse retrofits — a regular brief in Othery
- Levels agriculture — a regular brief in Othery
Garage Floor Screed in Othery — how it works
A typical Othery single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Specifications suited to Othery builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Othery
Within easy reach of Othery
Proof from the Somerset workload
Common Othery build questions
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Othery site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Othery garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Othery?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Othery garage usage.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Othery diary.
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Othery jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Talk to a Othery-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site