Renovation Screed · Somerset
Renovation Screed Poured to SR1 in Wells
Across Wells we lay overlay and replacement screeds for renovations from period cottages to 1960s semis, using thin-section liquid pours where ceiling heights or thresholds are constrained.
Get a fixed price for Renovation Screed Poured to SR1 in Wells
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Wells we lay overlay and replacement screeds for renovations from period cottages to 1960s semis, using thin-section liquid pours where ceiling heights or thresholds are constrained.
Old buildings move differently. We talk through movement joints at thresholds and against existing walls, so the new floor doesn't fight the old structure.
Most of our Wells jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Wells sits Bridgwater (15 mi), and we work the surrounding villages on the same week's diary.
Renovation Screed in Wells — how it works
Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.
Where you're stripping back to a sound original slab in Wells, we'll prep, prime and bond a thin liquid screed straight onto it from 30mm — no need to dig out.
BA5 access, routes and logistics
County
Somerset
District
Somerset
Postcode
BA5
Nearest city
Bridgwater (15 mi)
Nearest motorway
M5 (J22, ~17 mi)
Primary A-road
A39 / A371
Local industries
independent retail, market-town hospitality
Common builds
Georgian townhouses, stone cottages
What Wells builds usually need
- Georgian townhouses — a regular brief in Wells
- Stone cottages — a regular brief in Wells
- Small new-build estates — a regular brief in Wells
- High-street shop retrofits — a regular brief in Wells
- Independent retail — a regular brief in Wells
Latest jobs across Somerset
What to expect on pour day in Wells
- 1
Site visit — inspect substrate, threshold heights, structural movement
- 2
Strip and prep, or prime existing slab
- 3
Insulation, UFH coordination and edge isolation
- 4
Pour, level and protect
- 5
Floor coverings once dry and signed off
What backs our Wells work
Wells-area service radius
Materials and systems we use in Wells
Cemfloor CT-C30-F6 (thin-section)
Where minimum depth matters more than maximum mass.
Cemfloor Therm
Retro-fit UFH in renovation builds.
Acoustic underlay
Critical for {town} flat conversions where impact noise is a concern.
Self-levelling overlay primer
For bonded thin-section pours over existing slabs.
Wells screed questions, answered
What's the disruption like?+
Pump day is loud for a couple of hours. After that, the room is cordoned for 24-48 hours while the floor cures. We work clean and protect adjacent finishes.
Will the screed stick to my old skirtings?+
We fit edge isolation strip against every wall before the pour — no bonding to skirtings, no risk to plaster.
Can you screed over my existing concrete floor in Wells?+
Usually yes — if the slab is sound we bond a thin liquid screed straight on top from 30mm. We'll assess the Wells substrate at the site visit and price accordingly.
Is liquid screed safe over a heritage property in Wells?+
With proper edge isolation and movement joints, yes. We discuss any conservation-area or listed-building constraints up front.
Can you do a single room rather than the whole house?+
Yes — single-room renovation pours are a regular run for us across Wells, with movement joints at the doorway to isolate from neighbouring rooms.
Will it work with my new UFH retro-fit?+
Yes — Cemfloor Therm at 50mm above pipe gives you full UFH performance in a renovation build-up most original structures can accommodate.
Book your Wells pour
Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site