Garage Floor Screed · Devon
Bow Garage Floor Screed Specialists
Bow garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Ready for a laser-flat floor in Bow?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Get a Bow quote07791 510849 WhatsApp usGet a fixed price for Bow Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Bow garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Bow jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Bow sits Exeter (15 mi), and we work the surrounding villages on the same week's diary.
Who this is for in Bow
Bow sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Local facts that shape every Bow pour
County
Devon
District
Mid Devon
Postcode
EX17
Nearest city
Exeter (15 mi)
Nearest motorway
M5 (J27, ~10 mi)
Primary A-road
A3072
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Garage Floor Screed in Bow — how it works
For Bow garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
A typical Bow single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
What to expect on pour day in Bow
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Bow-area projects
Materials and systems we use in Bow
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Other areas we cover near Bow
What people in Bow usually ask
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Bow site visit.
Can liquid screed take an EV charger and a car's weight in Bow?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Bow garage usage.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Bow diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Bow site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Bow garage, we form it in the substrate first, then screed at constant thickness.
Why Bow clients pick us
Ready for a laser-flat floor in Bow?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site