Garage Floor Screed · Devon
Garage Floor Screed for Winkleigh Builds
Winkleigh garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Winkleigh Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Winkleigh garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Winkleigh jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Winkleigh sits Exeter (24 mi), and we work the surrounding villages on the same week's diary.
Common briefs across Winkleigh
- Cob-and-thatch cottages — a regular brief in Winkleigh
- Airfield hangars — a regular brief in Winkleigh
- Cider-mill buildings — a regular brief in Winkleigh
- Winkleigh Cider — a regular brief in Winkleigh
- Airfield — a regular brief in Winkleigh
Who this is for in Winkleigh
Winkleigh sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Garage Floor Screed in Winkleigh — how it works
For Winkleigh garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
A typical Winkleigh single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Materials and systems we use in Winkleigh
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
What to expect on pour day in Winkleigh
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Winkleigh-area projects
Other areas we cover near Winkleigh
Why Winkleigh clients pick us
What people in Winkleigh usually ask
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Winkleigh site visit.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Winkleigh site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Winkleigh garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Winkleigh diary.
Can liquid screed take an EV charger and a car's weight in Winkleigh?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Winkleigh garage usage.
Ready for a laser-flat floor in Winkleigh?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site