Renovation Screed · Devon
Bow Renovation Screed Specialists
Renovation floors in Bow rarely run true — old timber decks sag, original slabs slope, and threshold heights are tight. Liquid screed fixes all three in a single morning.
Ready for a laser-flat floor in Bow?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Get a Bow quote07791 510849 WhatsApp usGet a fixed price for Bow Renovation Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Renovation floors in Bow rarely run true — old timber decks sag, original slabs slope, and threshold heights are tight. Liquid screed fixes all three in a single morning.
Where you're stripping back to a sound original slab in Bow, we'll prep, prime and bond a thin liquid screed straight onto it from 30mm — no need to dig out.
Most of our Bow jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Bow sits Exeter (15 mi), and we work the surrounding villages on the same week's diary.
Built for Bow rural self-builders and farms
Bow sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
EX17 access, routes and logistics
County
Devon
District
Mid Devon
Postcode
EX17
Nearest city
Exeter (15 mi)
Nearest motorway
M5 (J27, ~10 mi)
Primary A-road
A3072
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Renovation Screed in Bow — how it works
Most Bow renovations want UFH retro-fit. Liquid screed lets you wrap pipes in a thin build-up the original construction never planned for.
Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.
Step-by-step for a Bow job
- 1
Site visit — inspect substrate, threshold heights, structural movement
- 2
Strip and prep, or prime existing slab
- 3
Insulation, UFH coordination and edge isolation
- 4
Pour, level and protect
- 5
Floor coverings once dry and signed off
Floors poured around Bow
Cemfloor systems for Bow
Cemfloor CT-C30-F6 (thin-section)
Where minimum depth matters more than maximum mass.
Cemfloor Therm
Retro-fit UFH in renovation builds.
Acoustic underlay
Critical for {town} flat conversions where impact noise is a concern.
Self-levelling overlay primer
For bonded thin-section pours over existing slabs.
Bow-area service radius
Common Bow build questions
Can you screed over my existing concrete floor in Bow?+
Usually yes — if the slab is sound we bond a thin liquid screed straight on top from 30mm. We'll assess the Bow substrate at the site visit and price accordingly.
Can you do a single room rather than the whole house?+
Yes — single-room renovation pours are a regular run for us across Bow, with movement joints at the doorway to isolate from neighbouring rooms.
Will it work with my new UFH retro-fit?+
Yes — Cemfloor Therm at 50mm above pipe gives you full UFH performance in a renovation build-up most original structures can accommodate.
Is liquid screed safe over a heritage property in Bow?+
With proper edge isolation and movement joints, yes. We discuss any conservation-area or listed-building constraints up front.
Will the screed stick to my old skirtings?+
We fit edge isolation strip against every wall before the pour — no bonding to skirtings, no risk to plaster.
What about screeding over a suspended timber floor?+
We can — with insulation, a DPM and structural sign-off that the joists can take the additional dead load. This is common in Bow period properties.
Proof from the Devon workload
Ready for a laser-flat floor in Bow?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site