Dental fit-outs
Liquid Screed for Dental Practice Fit-Outs
Dental chairs bolt to a flat, level floor. If the substrate isn't right, every chair install goes over programme.
Fitting out surgeries?
Name, phone, email — we'll reply the same working day with a fixed price.
Or call our landline on 01392 237700
Dental fit-outs are unforgiving. The chair, the cabinetry and the welded vinyl all assume a substrate that's SR1 flat and moisture-tested.
We pour that substrate first time, so the chair installer isn't shimming and the flooring team isn't welding over lippage.
Fit-out sequence
- 1
Strip out
Existing floor lifted, slab prepared.
- 2
Compliant build-up
DPM, insulation if extending, service ducts formed.
- 3
Pour
Cemfloor to SR1, one day per surgery.
- 4
Dry & test
Force-dried, moisture test at 10 days.
- 5
Hand off
Flooring contractor lays welded vinyl over an SR1 substrate.
What we handle around dental spec
- Cast-in floor boxes for compressor and suction lines
- Falls to floor drains in decontam rooms
- Chair-bolt zones cast dead flat to the bolt centres
Frequently asked
Related guides
Fitting out surgeries?
Send the equipment plan and the chair bolt centres. We'll pour to spec around them.