Garage Floor Screed · Somerset
Garage Floor Screed Poured to SR1 in Martock
Whether you're future-proofing a Martock garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Cemfloor-certified work near Martock
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Start a quote07791 510849 WhatsApp usGet a fixed price for Garage Floor Screed Poured to SR1 in Martock
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Martock garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Martock garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Martock jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Martock sits Taunton (18 mi), and we work the surrounding villages on the same week's diary.
Who this is for in Martock
Martock runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.
TA12 access, routes and logistics
County
Somerset
District
South Somerset
Postcode
TA12
Nearest city
Taunton (18 mi)
Nearest motorway
M5 (J25, ~20 mi)
Primary A-road
B3165
Local industries
Yandles workshops, agriculture
Common builds
hamstone cottages, Yandles-side commercial
Garage Floor Screed in Martock — how it works
A typical Martock single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
What to expect on pour day in Martock
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Floors poured around Martock
Materials and systems we use in Martock
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Martock-area service radius
Common Martock build questions
Can liquid screed take an EV charger and a car's weight in Martock?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Martock garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Martock garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Martock site clean and the floor protected with sheeting.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Martock diary.
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Martock site visit.
Proof from the Somerset workload
Cemfloor-certified work near Martock
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site