Garage Floor Screed · Somerset
Garage Floor Screed for Curry Rivel Builds
Curry Rivel garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Curry Rivel Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Curry Rivel garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Curry Rivel jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Curry Rivel sits Taunton (10 mi), and we work the surrounding villages on the same week's diary.
Where liquid screed earns its keep in Curry Rivel
- Stone farmhouses — a regular brief in Curry Rivel
- Barn conversions — a regular brief in Curry Rivel
- Cottage extensions — a regular brief in Curry Rivel
- Occasional new-build cottages — a regular brief in Curry Rivel
- Agriculture — a regular brief in Curry Rivel
Right fit for Curry Rivel rural self-builders and farms
Curry Rivel sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Garage Floor Screed in Curry Rivel — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Specifications suited to Curry Rivel builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
How a Curry Rivel pour runs
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Latest jobs across Somerset
Adjacent areas — usually same-week diary
What backs our Curry Rivel work
Curry Rivel screed questions, answered
Can you do this on a single-garage budget?+
Yes — single-garage jobs are a regular run for us across Curry Rivel. We'll give you a flat quote with no surprises.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Curry Rivel garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Curry Rivel diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Curry Rivel?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Curry Rivel garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Curry Rivel site clean and the floor protected with sheeting.
Coverage across TA10
From Curry Rivel to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site