Garage Floor Screed · Devon
Kenton Garage Floor Screed Specialists
Kenton garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Kenton Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Kenton garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Kenton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Kenton sits Exeter (8 mi), and we work the surrounding villages on the same week's diary.
Garage Floor Screed in Kenton — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For Kenton garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Kenton at a glance
County
Devon
District
Teignbridge
Postcode
EX6
Nearest city
Exeter (8 mi)
Nearest motorway
M5 (J30, ~7 mi)
Primary A-road
A379
Local industries
Powderham Estate, agriculture
Common builds
estate cottages, Powderham-side conversions
Typical Kenton use cases
- Estate cottages — a regular brief in Kenton
- Powderham-side conversions — a regular brief in Kenton
- New infill homes — a regular brief in Kenton
- Powderham Estate — a regular brief in Kenton
- Agriculture — a regular brief in Kenton
Recent work near Kenton
Step-by-step for a Kenton job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Trust points for a Kenton brief
Within easy reach of Kenton
Cemfloor systems for Kenton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
FAQs from Kenton clients
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Kenton site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in Kenton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Kenton garage usage.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Kenton diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Kenton garage, we form it in the substrate first, then screed at constant thickness.
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Talk to a Kenton-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site