Garage Floor Screed · Devon

Garage Floor Screed — Kennford, Devon

Across Kennford we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.

Need Garage Floor Screed priced for Kennford?

Tell us the square metres and access notes. Most Kennford quotes go out the same day.

Request your quote07791 510849 WhatsApp us
Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Garage Floor Screed — Kennford, Devon

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

Across Kennford we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.

We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.

Most of our Kennford jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Kennford sits Exeter (5 mi), and we work the surrounding villages on the same week's diary.

Built for Kennford homeowners and self-builders

Kennford is residential-heavy, with renovation, extension and self-build briefs dominating the diary. We work directly with homeowners and their builders, with a single point of contact for the screed package.

EX6 access, routes and logistics

County

Devon

District

Teignbridge

Postcode

EX6

Nearest city

Exeter (5 mi)

Nearest motorway

M5 (J31, ~2 mi)

Primary A-road

A38

Local industries

local retail, school and community builds

Common builds

1930s semis, estate new-builds

Garage Floor Screed in Kennford — how it works

A typical Kennford single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.

We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.

Step-by-step for a Kennford job

  1. 1

    Site visit — assess the existing slab, falls, thresholds

  2. 2

    Prep: clean, prime or lay DPM and insulation

  3. 3

    Pump and level in a single morning

  4. 4

    Cover for 24 hours, walk-on by day 2

  5. 5

    Coatings or floor finishes once dry — typically 7-14 days

Floors poured around Kennford

Garage floor refinished in Torquay
Garage floor refinished in Torquay
Estuary-side residential retrofit in Topsham
Estuary-side residential retrofit in Topsham
Open-plan ground floor poured for a new-build in Exeter
Open-plan ground floor poured for a new-build in Exeter

Cemfloor systems for Kennford

Cemfloor CT-C30-F6

Cement-based screed — robust, coating-ready surface.

Bonding primer

For bonded pours over existing slabs.

DPM and slip membrane

For unbonded over insulation or older slabs.

Shot-blasting / grinding prep

Where the existing slab needs surface profile.

Common Kennford build questions

Can liquid screed take an EV charger and a car's weight in Kennford?+

Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Kennford garage usage.

Can I finish the floor with epoxy?+

Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.

What about cold garages — will it cure?+

We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Kennford diary.

Will it slope to a drain?+

Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Kennford garage, we form it in the substrate first, then screed at constant thickness.

Do you tidy up afterwards?+

Wash-out is bagged and removed. We leave the Kennford site clean and the floor protected with sheeting.

Do you need to remove my existing garage floor?+

Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Kennford site visit.

Proof from the Devon workload

  1. 01Cemfloor-certified, fully insured, CDM-aware
  2. 02Coordinated with most South West UFH installers
  3. 03Pre-start meeting standard on every commercial job
  4. 04Local knowledge — we know the M5 (J31, ~2 mi) access window and A38 traffic patterns

Need Garage Floor Screed priced for Kennford?

Tell us the square metres and access notes. Most Kennford quotes go out the same day.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp