Liquid Screed · Devon
Liquid Screed — Kennford, Devon
From A38 trade units commercial floors to Splatford self-builds, liquid screed gives you one continuous slab with no shrinkage cracks and minimal curling.
Need Liquid Screed priced for Kennford?
Tell us the square metres and access notes. Most Kennford quotes go out the same day.
Request your quote07791 510849 WhatsApp usGet a fixed price for Kennford, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
From A38 trade units commercial floors to Splatford self-builds, liquid screed gives you one continuous slab with no shrinkage cracks and minimal curling.
We pump Cemfloor calcium-sulphate screed from a static mixer into your building, level it with a dappling bar, and walk away with a floor that's typically dry enough for floor coverings in roughly one day per millimetre of depth.
Most of our Kennford jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Kennford sits Exeter (5 mi), and we work the surrounding villages on the same week's diary.
Right fit for Kennford homeowners and self-builders
Kennford is residential-heavy, with renovation, extension and self-build briefs dominating the diary. We work directly with homeowners and their builders, with a single point of contact for the screed package.
What we plan around in Kennford
County
Devon
District
Teignbridge
Postcode
EX6
Nearest city
Exeter (5 mi)
Nearest motorway
M5 (J31, ~2 mi)
Primary A-road
A38
Local industries
local retail, school and community builds
Common builds
1930s semis, estate new-builds
Liquid Screed in Kennford — how it works
The screed arrives ready-mixed on a truck, gets pumped through a hose to wherever it's needed in the building, and self-levels to within a couple of millimetres across the room. We spike-roll it to release air, then leave it.
Liquid screed bonds into a single monolithic layer with no bays, no day joints and no need for steel mesh — it's poured around any UFH pipework you've already pressure-tested.
How a Kennford pour runs
- 1
Site visit and written quote — confirm depths, area, access, build-up
- 2
We prep edge insulation, polythene DPM and any UFH coordination
- 3
Pump day: ready-mixed screed pumped, levelled and spike-rolled in one pour
- 4
Cover and protect for 24-48 hours
- 5
Light foot traffic from day 2; floor coverings once moisture content is signed off
Recent work near Kennford
Specifications suited to Kennford builds
Cemfloor CT-C30-F6
Cement-based liquid screed — fast-drying, low shrinkage, suitable for most floor coverings.
Cemfloor Therm
Optimised for underfloor heating with high thermal conductivity.
Acoustic and thermal insulation underlay
PIR, EPS or acoustic mat depending on the build-up.
Edge isolation strip
10mm closed-cell foam to allow thermal movement.
Adjacent areas — usually same-week diary
FAQs from Kennford clients
Can liquid screed go over an existing concrete slab?+
Yes — typically unbonded over a DPM and slip membrane, from 35mm. We'll assess the substrate at the Kennford site visit.
How quickly can I walk on a liquid screed floor in Kennford?+
Light foot traffic from 24-48 hours after the pour. Heavy loading, follow-on trades and final floor coverings depend on depth and ambient conditions — we leave you with clear drying guidance for your specific Kennford job.
Can you pour in cold weather?+
Yes, with the right ambient control. We won't pour below 5°C and we'll discuss frost protection for any Kennford pour in the colder months.
Does liquid screed crack like sand-and-cement?+
Calcium-sulphate and modern cement-based liquid screeds have very low drying shrinkage. With proper edge isolation and joints at doorways, cracking is rare.
Do I need to be on site for the pour in Kennford?+
Not necessarily — we usually agree access with the main contractor or self-builder and run the pour with our own team. We'll confirm the Kennford access route, pump position and waste route before the day.
Do you offer a guarantee?+
Yes — as a Cemfloor-certified installer, qualifying jobs are backed by a 10-year manufacturer-supported guarantee.
Trust points for a Kennford brief
- 01Cemfloor-certified, fully insured, CDM-aware
- 02Coordinated with most South West UFH installers
- 03Pre-start meeting standard on every commercial job
- 04Local knowledge — we know the M5 (J31, ~2 mi) access window and A38 traffic patterns
Need Liquid Screed priced for Kennford?
Tell us the square metres and access notes. Most Kennford quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site