Garage Floor Screed · Devon
Garage Floor Screed Poured to SR1 in Lympstone
Whether you're future-proofing a Lympstone garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed Poured to SR1 in Lympstone
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Lympstone garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Lympstone garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Lympstone jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Lympstone sits Exeter (8 mi), and we work the surrounding villages on the same week's diary.
Where liquid screed earns its keep in Lympstone
- Estuary cottages — a regular brief in Lympstone
- Commando-base support buildings — a regular brief in Lympstone
- Modern infills — a regular brief in Lympstone
- Royal Marines CTC — a regular brief in Lympstone
- Estuary residential — a regular brief in Lympstone
Built for Lympstone coastal residential and hospitality clients
Lympstone is a coastal town, so damp control, salt exposure and tight winter pour windows shape every brief. We work the diary around that — and around the holiday-let turnover that funds half the jobs here.
Garage Floor Screed in Lympstone — how it works
A typical Lympstone single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Cemfloor systems for Lympstone
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Step-by-step for a Lympstone job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Floors poured around Lympstone
Adjacent areas — usually same-week diary
Proof from the Devon workload
Common Lympstone build questions
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Lympstone garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Lympstone?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Lympstone garage usage.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Lympstone diary.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Lympstone site clean and the floor protected with sheeting.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
Cemfloor-certified work near Lympstone
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site