Renovation Screed · Devon
Kenton Renovation Screed Specialists
Renovation floors in Kenton rarely run true — old timber decks sag, original slabs slope, and threshold heights are tight. Liquid screed fixes all three in a single morning.
Get a fixed price for Kenton Renovation Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Renovation floors in Kenton rarely run true — old timber decks sag, original slabs slope, and threshold heights are tight. Liquid screed fixes all three in a single morning.
Where you're stripping back to a sound original slab in Kenton, we'll prep, prime and bond a thin liquid screed straight onto it from 30mm — no need to dig out.
Most of our Kenton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Kenton sits Exeter (8 mi), and we work the surrounding villages on the same week's diary.
Renovation Screed in Kenton — how it works
Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.
Where you're stripping back to a sound original slab in Kenton, we'll prep, prime and bond a thin liquid screed straight onto it from 30mm — no need to dig out.
Kenton at a glance
County
Devon
District
Teignbridge
Postcode
EX6
Nearest city
Exeter (8 mi)
Nearest motorway
M5 (J30, ~7 mi)
Primary A-road
A379
Local industries
Powderham Estate, agriculture
Common builds
estate cottages, Powderham-side conversions
Typical Kenton use cases
- Estate cottages — a regular brief in Kenton
- Powderham-side conversions — a regular brief in Kenton
- New infill homes — a regular brief in Kenton
- Powderham Estate — a regular brief in Kenton
- Agriculture — a regular brief in Kenton
Latest jobs across Devon
How a Kenton pour runs
- 1
Site visit — inspect substrate, threshold heights, structural movement
- 2
Strip and prep, or prime existing slab
- 3
Insulation, UFH coordination and edge isolation
- 4
Pour, level and protect
- 5
Floor coverings once dry and signed off
What backs our Kenton work
Within easy reach of Kenton
Specifications suited to Kenton builds
Cemfloor CT-C30-F6 (thin-section)
Where minimum depth matters more than maximum mass.
Cemfloor Therm
Retro-fit UFH in renovation builds.
Acoustic underlay
Critical for {town} flat conversions where impact noise is a concern.
Self-levelling overlay primer
For bonded thin-section pours over existing slabs.
Kenton screed questions, answered
How do you handle threshold heights in older Kenton properties?+
We design the build-up around your target finished-floor level — including covering thickness — so doors still swing and thresholds still meet. Often that means thinner insulation and a thinner screed.
Can you do a single room rather than the whole house?+
Yes — single-room renovation pours are a regular run for us across Kenton, with movement joints at the doorway to isolate from neighbouring rooms.
Will the screed stick to my old skirtings?+
We fit edge isolation strip against every wall before the pour — no bonding to skirtings, no risk to plaster.
Is liquid screed safe over a heritage property in Kenton?+
With proper edge isolation and movement joints, yes. We discuss any conservation-area or listed-building constraints up front.
Will it work with my new UFH retro-fit?+
Yes — Cemfloor Therm at 50mm above pipe gives you full UFH performance in a renovation build-up most original structures can accommodate.
Can you screed over my existing concrete floor in Kenton?+
Usually yes — if the slab is sound we bond a thin liquid screed straight on top from 30mm. We'll assess the Kenton substrate at the site visit and price accordingly.
Talk to a Kenton-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site