Garage Floor Screed · Somerset
Garage Floor Screed — Dunster, Somerset
Whether you're future-proofing a Dunster garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed — Dunster, Somerset
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Dunster garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Dunster garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Dunster jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Dunster sits Taunton (22 mi), and we work the surrounding villages on the same week's diary.
Dunster at a glance
County
Somerset
District
Somerset West
Postcode
TA24
Nearest city
Taunton (22 mi)
Nearest motorway
M5 (J25, ~25 mi)
Primary A-road
A39
Local industries
National Trust, tourism
Common builds
medieval high-street, castle-estate cottages
Typical Dunster use cases
- Medieval high-street — a regular brief in Dunster
- Castle-estate cottages — a regular brief in Dunster
- Small hotels — a regular brief in Dunster
- National Trust — a regular brief in Dunster
- Tourism — a regular brief in Dunster
Garage Floor Screed in Dunster — how it works
A typical Dunster single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Materials and systems we use in Dunster
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Dunster
Within easy reach of Dunster
Proof from the Somerset workload
Common Dunster build questions
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Dunster site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Dunster garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Dunster diary.
Can liquid screed take an EV charger and a car's weight in Dunster?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Dunster garage usage.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
From the first site visit to the final laitance sand, our Dunster jobs are run as one fixed-price piece of work — no creeping extras.
Book your Dunster pour
Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site