Garage Floor Screed · Somerset
Watchet Garage Floor Screed Specialists
Watchet garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Watchet Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Watchet garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Watchet jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Watchet sits Taunton (16 mi), and we work the surrounding villages on the same week's diary.
What Watchet builds usually need
- Harbour cottages — a regular brief in Watchet
- Paper-mill conversions — a regular brief in Watchet
- Small marina — a regular brief in Watchet
- Working marina — a regular brief in Watchet
- Paper heritage — a regular brief in Watchet
Built for Watchet coastal residential and hospitality clients
Watchet is a coastal town, so damp control, salt exposure and tight winter pour windows shape every brief. We work the diary around that — and around the holiday-let turnover that funds half the jobs here.
Garage Floor Screed in Watchet — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Cemfloor systems for Watchet
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Step-by-step for a Watchet job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Latest jobs across Somerset
Watchet-area service radius
What backs our Watchet work
Watchet screed questions, answered
Can you do garage conversions as well?+
Yes — full conversion floors with insulation, UFH and screed in one coordinated package across Watchet and the surrounding area.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Watchet diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Watchet?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Watchet garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Watchet site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Watchet garage, we form it in the substrate first, then screed at constant thickness.
Talk to a Watchet-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site