Garage Floor Screed · Somerset
Garage Floor Screed Poured to SR1 in Dulverton
Whether you're future-proofing a Dulverton garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed Poured to SR1 in Dulverton
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Dulverton garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Dulverton garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Dulverton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Dulverton sits Taunton (18 mi), and we work the surrounding villages on the same week's diary.
Why Dulverton site context matters
County
Somerset
District
Somerset West and Taunton
Postcode
TA22
Nearest city
Taunton (18 mi)
Nearest motorway
M5 (J27, ~13 mi)
Primary A-road
B3222
Local industries
upland farming, holiday lets
Common builds
granite cottages, farmhouse conversions
Garage Floor Screed in Dulverton — how it works
A typical Dulverton single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Built for Dulverton rural self-builders and farms
Dulverton sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Cemfloor systems for Dulverton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Dulverton
Proof from the Somerset workload
Common Dulverton build questions
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Dulverton site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in Dulverton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Dulverton garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Dulverton garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Dulverton diary.
Can you do this on a single-garage budget?+
Yes — single-garage jobs are a regular run for us across Dulverton. We'll give you a flat quote with no surprises.
Nearby villages and towns
Whether it's a single-room retrofit or a full rural self-builders and farms build in Dulverton, the goal is the same — one pour, laser-flat, ready to take coverings without fuss.
Cemfloor-certified work near Dulverton
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site