Liquid Screed · Somerset
Liquid Screed — Dunster, Somerset
Across Dunster we lay self-levelling Cemfloor screed at depths from 30mm, pumping straight off the truck and finishing to a true SR1 — no hand-trowelling, no cold joints.
Get a fixed price for Dunster, Somerset
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Dunster we lay self-levelling Cemfloor screed at depths from 30mm, pumping straight off the truck and finishing to a true SR1 — no hand-trowelling, no cold joints.
Liquid screed bonds into a single monolithic layer with no bays, no day joints and no need for steel mesh — it's poured around any UFH pipework you've already pressure-tested.
Most of our Dunster jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Dunster sits Taunton (22 mi), and we work the surrounding villages on the same week's diary.
Local facts that shape every Dunster pour
County
Somerset
District
Somerset West
Postcode
TA24
Nearest city
Taunton (22 mi)
Nearest motorway
M5 (J25, ~25 mi)
Primary A-road
A39
Local industries
National Trust, tourism
Common builds
medieval high-street, castle-estate cottages
Common briefs across Dunster
- Medieval high-street — a regular brief in Dunster
- Castle-estate cottages — a regular brief in Dunster
- Small hotels — a regular brief in Dunster
- National Trust — a regular brief in Dunster
- Tourism — a regular brief in Dunster
Liquid Screed in Dunster — how it works
The screed arrives ready-mixed on a truck, gets pumped through a hose to wherever it's needed in the building, and self-levels to within a couple of millimetres across the room. We spike-roll it to release air, then leave it.
Liquid screed bonds into a single monolithic layer with no bays, no day joints and no need for steel mesh — it's poured around any UFH pipework you've already pressure-tested.
Cemfloor systems for Dunster
Cemfloor CT-C30-F6
Cement-based liquid screed — fast-drying, low shrinkage, suitable for most floor coverings.
Cemfloor Therm
Optimised for underfloor heating with high thermal conductivity.
Acoustic and thermal insulation underlay
PIR, EPS or acoustic mat depending on the build-up.
Edge isolation strip
10mm closed-cell foam to allow thermal movement.
Recent work near Dunster
Other areas we cover near Dunster
Trust points for a Dunster brief
FAQs from Dunster clients
How quickly can I walk on a liquid screed floor in Dunster?+
Light foot traffic from 24-48 hours after the pour. Heavy loading, follow-on trades and final floor coverings depend on depth and ambient conditions — we leave you with clear drying guidance for your specific Dunster job.
Can you pour in cold weather?+
Yes, with the right ambient control. We won't pour below 5°C and we'll discuss frost protection for any Dunster pour in the colder months.
Can liquid screed go over an existing concrete slab?+
Yes — typically unbonded over a DPM and slip membrane, from 35mm. We'll assess the substrate at the Dunster site visit.
Do you offer a guarantee?+
Yes — as a Cemfloor-certified installer, qualifying jobs are backed by a 10-year manufacturer-supported guarantee.
Do I need to be on site for the pour in Dunster?+
Not necessarily — we usually agree access with the main contractor or self-builder and run the pour with our own team. We'll confirm the Dunster access route, pump position and waste route before the day.
Does liquid screed crack like sand-and-cement?+
Calcium-sulphate and modern cement-based liquid screeds have very low drying shrinkage. With proper edge isolation and joints at doorways, cracking is rare.
Dunster jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Book your Dunster pour
Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site