Underfloor Heating Screed · Somerset
Wedmore Underfloor Heating Screed Specialists
Underfloor heating only works as well as the screed encasing it — and in Wedmore that means a high-thermal-conductivity liquid pour that wraps every pipe with no voids.
Get a fixed price for Wedmore Underfloor Heating Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Underfloor heating only works as well as the screed encasing it — and in Wedmore that means a high-thermal-conductivity liquid pour that wraps every pipe with no voids.
The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.
Most of our Wedmore jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Wedmore sits Weston-super-Mare (12 mi), and we work the surrounding villages on the same week's diary.
BS28 access, routes and logistics
County
Somerset
District
Sedgemoor
Postcode
BS28
Nearest city
Weston-super-Mare (12 mi)
Nearest motorway
M5 (J22, ~10 mi)
Primary A-road
B3151
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Underfloor Heating Screed in Wedmore — how it works
For Wedmore UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Wedmore renovations.
Right fit for Wedmore rural self-builders and farms
Wedmore sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Specifications suited to Wedmore builds
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
Wedmore-area projects
Why Wedmore clients pick us
What people in Wedmore usually ask
Can you screed over wet UFH and electric UFH?+
Yes — Cemfloor Therm encapsulates both. Electric mat systems usually take a thinner cover; wet pipes need the 50mm minimum.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
When can I switch the underfloor heating on in Wedmore?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Wedmore clients to the schedule.
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
Wedmore-area service radius
From the first site visit to the final laitance sand, our Wedmore jobs are run as one fixed-price piece of work — no creeping extras.
Coverage across BS28
From Wedmore to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site