Liquid Screed · Somerset
Shepton Mallet Liquid Screed Specialists
Liquid screed in Shepton Mallet solves what sand-and-cement struggles with — SR1 flatness in a single pour, ready for tilers and joiners within days rather than weeks.
Get a fixed price for Shepton Mallet Liquid Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Liquid screed in Shepton Mallet solves what sand-and-cement struggles with — SR1 flatness in a single pour, ready for tilers and joiners within days rather than weeks.
The screed arrives ready-mixed on a truck, gets pumped through a hose to wherever it's needed in the building, and self-levels to within a couple of millimetres across the room. We spike-roll it to release air, then leave it.
Most of our Shepton Mallet jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Shepton Mallet sits Bridgwater (20 mi), and we work the surrounding villages on the same week's diary.
Where liquid screed earns its keep in Shepton Mallet
- Georgian townhouses — a regular brief in Shepton Mallet
- Stone cottages — a regular brief in Shepton Mallet
- Small new-build estates — a regular brief in Shepton Mallet
- High-street shop retrofits — a regular brief in Shepton Mallet
- Independent retail — a regular brief in Shepton Mallet
Built for Shepton Mallet homeowners and contractors alike
Shepton Mallet runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.
Liquid Screed in Shepton Mallet — how it works
The screed arrives ready-mixed on a truck, gets pumped through a hose to wherever it's needed in the building, and self-levels to within a couple of millimetres across the room. We spike-roll it to release air, then leave it.
Liquid screed bonds into a single monolithic layer with no bays, no day joints and no need for steel mesh — it's poured around any UFH pipework you've already pressure-tested.
Cemfloor systems for Shepton Mallet
Cemfloor CT-C30-F6
Cement-based liquid screed — fast-drying, low shrinkage, suitable for most floor coverings.
Cemfloor Therm
Optimised for underfloor heating with high thermal conductivity.
Acoustic and thermal insulation underlay
PIR, EPS or acoustic mat depending on the build-up.
Edge isolation strip
10mm closed-cell foam to allow thermal movement.
Step-by-step for a Shepton Mallet job
- 1
Site visit and written quote — confirm depths, area, access, build-up
- 2
We prep edge insulation, polythene DPM and any UFH coordination
- 3
Pump day: ready-mixed screed pumped, levelled and spike-rolled in one pour
- 4
Cover and protect for 24-48 hours
- 5
Light foot traffic from day 2; floor coverings once moisture content is signed off
Recent work near Shepton Mallet
Adjacent areas — usually same-week diary
Trust points for a Shepton Mallet brief
FAQs from Shepton Mallet clients
How quickly can I walk on a liquid screed floor in Shepton Mallet?+
Light foot traffic from 24-48 hours after the pour. Heavy loading, follow-on trades and final floor coverings depend on depth and ambient conditions — we leave you with clear drying guidance for your specific Shepton Mallet job.
Can you pour in cold weather?+
Yes, with the right ambient control. We won't pour below 5°C and we'll discuss frost protection for any Shepton Mallet pour in the colder months.
Can liquid screed go over an existing concrete slab?+
Yes — typically unbonded over a DPM and slip membrane, from 35mm. We'll assess the substrate at the Shepton Mallet site visit.
Does liquid screed crack like sand-and-cement?+
Calcium-sulphate and modern cement-based liquid screeds have very low drying shrinkage. With proper edge isolation and joints at doorways, cracking is rare.
Do you offer a guarantee?+
Yes — as a Cemfloor-certified installer, qualifying jobs are backed by a 10-year manufacturer-supported guarantee.
Do I need to be on site for the pour in Shepton Mallet?+
Not necessarily — we usually agree access with the main contractor or self-builder and run the pour with our own team. We'll confirm the Shepton Mallet access route, pump position and waste route before the day.
Talk to a Shepton Mallet-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site