Garage Floor Screed · Devon
Lifton Garage Floor Screed Specialists
Garage floors in Lifton tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
Get a fixed price for Lifton Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Garage floors in Lifton tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
A typical Lifton single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Most of our Lifton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Lifton sits Plymouth (25 mi), and we work the surrounding villages on the same week's diary.
Lifton at a glance
County
Devon
District
West Devon
Postcode
PL16
Nearest city
Plymouth (25 mi)
Nearest motorway
M5 (J31, ~34 mi)
Primary A-road
A30
Local industries
distribution, light manufacturing
Common builds
steel-frame units, warehouse floors
Typical Lifton use cases
- Steel-frame units — a regular brief in Lifton
- Warehouse floors — a regular brief in Lifton
- Trade-counter fit-outs — a regular brief in Lifton
- Distribution sheds — a regular brief in Lifton
- Distribution — a regular brief in Lifton
Garage Floor Screed in Lifton — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Cemfloor systems for Lifton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Latest jobs across Devon
Within easy reach of Lifton
What backs our Lifton work
Hundreds of square metres poured around Lifton in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Lifton screed questions, answered
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Can liquid screed take an EV charger and a car's weight in Lifton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Lifton garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Lifton site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Lifton garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Lifton diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Pin down a date for your Lifton pour, and we'll handle the rest — pump, mix, lay, level, protect, hand over.
Talk to a Lifton-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site