Garage Floor Screed · Devon

Garage Floor Screed — Bratton Clovelly, Devon

Across Bratton Clovelly we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.

Liquid screed work near Garage Floor Screed — Bratton Clovelly, Devon
Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Garage Floor Screed — Bratton Clovelly, Devon

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

Across Bratton Clovelly we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.

We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.

Most of our Bratton Clovelly jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Bratton Clovelly sits Exeter (28 mi), and we work the surrounding villages on the same week's diary.

Local facts that shape every Bratton Clovelly pour

County

Devon

District

West Devon

Postcode

EX20

Nearest city

Exeter (28 mi)

Nearest motorway

M5 (J31, ~30 mi)

Primary A-road

A3079

Local industries

agriculture, equestrian yards

Common builds

stone farmhouses, barn conversions

Garage Floor Screed in Bratton Clovelly — how it works

A typical Bratton Clovelly single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.

We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.

Right fit for Bratton Clovelly rural self-builders and farms

Bratton Clovelly sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.

Specifications suited to Bratton Clovelly builds

Cemfloor CT-C30-F6

Cement-based screed — robust, coating-ready surface.

Bonding primer

For bonded pours over existing slabs.

DPM and slip membrane

For unbonded over insulation or older slabs.

Shot-blasting / grinding prep

Where the existing slab needs surface profile.

Floors poured around Bratton Clovelly

Garage floor refinished in Torquay
Garage floor refinished in Torquay
Open-plan ground floor poured for a new-build in Exeter
Open-plan ground floor poured for a new-build in Exeter
Fresh liquid screed pour in an Exeter extension
Fresh liquid screed pour in an Exeter extension

Proof from the Devon workload

  1. 01Cemfloor-certified, fully insured, CDM-aware
  2. 02Coordinated with most South West UFH installers
  3. 03Pre-start meeting standard on every commercial job
  4. 04Local knowledge — we know the M5 (J31, ~30 mi) access window and A3079 traffic patterns

Common Bratton Clovelly build questions

What about cold garages — will it cure?+

We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Bratton Clovelly diary.

Can I finish the floor with epoxy?+

Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.

Will it slope to a drain?+

Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Bratton Clovelly garage, we form it in the substrate first, then screed at constant thickness.

Can liquid screed take an EV charger and a car's weight in Bratton Clovelly?+

Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Bratton Clovelly garage usage.

Do you tidy up afterwards?+

Wash-out is bagged and removed. We leave the Bratton Clovelly site clean and the floor protected with sheeting.

Do you need to remove my existing garage floor?+

Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Bratton Clovelly site visit.

From the first site visit to the final laitance sand, our Bratton Clovelly jobs are run as one fixed-price piece of work — no creeping extras.

Book your Bratton Clovelly pour

Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp