Garage Floor Screed · Somerset
Highbridge Garage Floor Screed Specialists
Garage floors in Highbridge tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
Get a fixed price for Highbridge Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Garage floors in Highbridge tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
A typical Highbridge single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Most of our Highbridge jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Highbridge sits Bridgwater (8 mi), and we work the surrounding villages on the same week's diary.
TA9 access, routes and logistics
County
Somerset
District
Sedgemoor
Postcode
TA9
Nearest city
Bridgwater (8 mi)
Nearest motorway
M5 (J22, ~2 mi)
Primary A-road
A38
Local industries
Isleport Business Park, distribution
Common builds
Victorian terraces, trade-park units
Garage Floor Screed in Highbridge — how it works
A typical Highbridge single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Built for Highbridge contractors and developers
Highbridge skews commercial — trade parks like Isleport Business Park, contractor-led fit-outs, and developer estates. We price as a sub-contractor on programme, with RAMS and CDM documentation issued ahead of mobilisation.
Cemfloor systems for Highbridge
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Highbridge
Proof from the Somerset workload
Hundreds of square metres poured around Highbridge in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Common Highbridge build questions
Can liquid screed take an EV charger and a car's weight in Highbridge?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Highbridge garage usage.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Highbridge diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Highbridge garage, we form it in the substrate first, then screed at constant thickness.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Highbridge site clean and the floor protected with sheeting.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
Highbridge-area service radius
Highbridge jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Talk to a Highbridge-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site