Garage Floor Screed · Devon
Garage Floor Screed for Branscombe Builds
Branscombe garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Branscombe Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Branscombe garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Branscombe jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Branscombe sits Exeter (22 mi), and we work the surrounding villages on the same week's diary.
Branscombe at a glance
County
Devon
District
East Devon
Postcode
EX12
Nearest city
Exeter (22 mi)
Nearest motorway
M5 (J25, ~22 mi)
Primary A-road
minor coastal roads
Local industries
National Trust, tourism
Common builds
listed thatched cottages, National Trust outbuildings
Typical Branscombe use cases
- Listed thatched cottages — a regular brief in Branscombe
- National Trust outbuildings — a regular brief in Branscombe
- Small farms — a regular brief in Branscombe
- National Trust — a regular brief in Branscombe
- Tourism — a regular brief in Branscombe
Garage Floor Screed in Branscombe — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Specifications suited to Branscombe builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Latest jobs across Devon
Within easy reach of Branscombe
What backs our Branscombe work
Branscombe screed questions, answered
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Branscombe site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in Branscombe?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Branscombe garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Branscombe garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Branscombe diary.
Branscombe jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Ready for a laser-flat floor in Branscombe?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site