Garage Floor Screed · Devon
Cemfloor-Certified Garage Floor Screed Across Beer
Across Beer we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.
Get a fixed price for Cemfloor-Certified Garage Floor Screed Across Beer
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Beer we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Most of our Beer jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Beer sits Exeter (24 mi), and we work the surrounding villages on the same week's diary.
Where liquid screed earns its keep in Beer
- Cliffside cottages — a regular brief in Beer
- Fishery sheds — a regular brief in Beer
- Small B&Bs — a regular brief in Beer
- Fishing — a regular brief in Beer
- Tourism — a regular brief in Beer
Built for Beer coastal residential and hospitality clients
Beer is a coastal town, so damp control, salt exposure and tight winter pour windows shape every brief. We work the diary around that — and around the holiday-let turnover that funds half the jobs here.
Garage Floor Screed in Beer — how it works
For Beer garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
A typical Beer single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Cemfloor systems for Beer
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Step-by-step for a Beer job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Beer-area projects
Adjacent areas — usually same-week diary
Why Beer clients pick us
- 01Cemfloor-certified, fully insured, CDM-aware
- 02Coordinated with most South West UFH installers
- 03Pre-start meeting standard on every commercial job
- 04Local knowledge — we know the M5 (J25, ~24 mi) access window and B3174 traffic patterns
What people in Beer usually ask
Can you do this on a single-garage budget?+
Yes — single-garage jobs are a regular run for us across Beer. We'll give you a flat quote with no surprises.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Beer diary.
Can liquid screed take an EV charger and a car's weight in Beer?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Beer garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Beer garage, we form it in the substrate first, then screed at constant thickness.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Beer site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Cemfloor-certified work near Beer
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site