Garage Floor Screed · Devon

Cemfloor-Certified Garage Floor Screed Across Salcombe Regis

Across Salcombe Regis we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.

Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Cemfloor-Certified Garage Floor Screed Across Salcombe Regis

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

Across Salcombe Regis we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.

We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.

Most of our Salcombe Regis jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Salcombe Regis sits Exeter (16 mi), and we work the surrounding villages on the same week's diary.

Typical Salcombe Regis use cases

  • Seafront apartments — a regular brief in Salcombe Regis
  • 1930s coastal semis — a regular brief in Salcombe Regis
  • Harbourside conversions — a regular brief in Salcombe Regis
  • Guest-house retrofits — a regular brief in Salcombe Regis
  • Tourism lets — a regular brief in Salcombe Regis

Who this is for in Salcombe Regis

Salcombe Regis is a coastal town, so damp control, salt exposure and tight winter pour windows shape every brief. We work the diary around that — and around the holiday-let turnover that funds half the jobs here.

Garage Floor Screed in Salcombe Regis — how it works

Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.

For Salcombe Regis garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.

Materials and systems we use in Salcombe Regis

Cemfloor CT-C30-F6

Cement-based screed — robust, coating-ready surface.

Bonding primer

For bonded pours over existing slabs.

DPM and slip membrane

For unbonded over insulation or older slabs.

Shot-blasting / grinding prep

Where the existing slab needs surface profile.

What to expect on pour day in Salcombe Regis

  1. 1

    Site visit — assess the existing slab, falls, thresholds

  2. 2

    Prep: clean, prime or lay DPM and insulation

  3. 3

    Pump and level in a single morning

  4. 4

    Cover for 24 hours, walk-on by day 2

  5. 5

    Coatings or floor finishes once dry — typically 7-14 days

Recent work near Salcombe Regis

Garage floor refinished in Torquay
Garage floor refinished in Torquay
Renovation screed for a barn conversion near Honiton
Renovation screed for a barn conversion near Honiton
UFH screed laid over a coastal apartment in Exmouth
UFH screed laid over a coastal apartment in Exmouth

Trust points for a Salcombe Regis brief

  1. 01Cemfloor-certified, fully insured, CDM-aware
  2. 02Coordinated with most South West UFH installers
  3. 03Pre-start meeting standard on every commercial job
  4. 04Local knowledge — we know the M5 (J30, ~15 mi) access window and A3052 traffic patterns

FAQs from Salcombe Regis clients

Do you tidy up afterwards?+

Wash-out is bagged and removed. We leave the Salcombe Regis site clean and the floor protected with sheeting.

Can liquid screed take an EV charger and a car's weight in Salcombe Regis?+

Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Salcombe Regis garage usage.

What about cold garages — will it cure?+

We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Salcombe Regis diary.

Can I finish the floor with epoxy?+

Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.

Will it slope to a drain?+

Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Salcombe Regis garage, we form it in the substrate first, then screed at constant thickness.

Can you do garage conversions as well?+

Yes — full conversion floors with insulation, UFH and screed in one coordinated package across Salcombe Regis and the surrounding area.

Book your Salcombe Regis pour

Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp