Garage Floor Screed · Devon
Garage Floor Screed Poured to SR1 in Sidford
Whether you're future-proofing a Sidford garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Need Garage Floor Screed priced for Sidford?
Tell us the square metres and access notes. Most Sidford quotes go out the same day.
Request your quote07791 510849 WhatsApp usGet a fixed price for Garage Floor Screed Poured to SR1 in Sidford
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Sidford garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Sidford garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Sidford jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Sidford sits Exeter (16 mi), and we work the surrounding villages on the same week's diary.
Built for Sidford homeowners and self-builders
Sidford is residential-heavy, with renovation, extension and self-build briefs dominating the diary. We work directly with homeowners and their builders, with a single point of contact for the screed package.
What we plan around in Sidford
County
Devon
District
East Devon
Postcode
EX10
Nearest city
Exeter (16 mi)
Nearest motorway
M5 (J30, ~16 mi)
Primary A-road
A375 / A3052
Local industries
commuter, independent retail
Common builds
modern semis, small commercial units
Garage Floor Screed in Sidford — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For Sidford garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Step-by-step for a Sidford job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Recent work near Sidford
Cemfloor systems for Sidford
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Adjacent areas — usually same-week diary
FAQs from Sidford clients
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Sidford garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Sidford?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Sidford garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Sidford site clean and the floor protected with sheeting.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Sidford diary.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
Trust points for a Sidford brief
Need Garage Floor Screed priced for Sidford?
Tell us the square metres and access notes. Most Sidford quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site