Garage Floor Screed · Devon
Uplyme Garage Floor Screed Specialists
Garage floors in Uplyme tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
Get a fixed price for Uplyme Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Garage floors in Uplyme tend to inherit uneven slabs and old falls. A bonded or unbonded liquid screed lays a fresh, flat surface in a single morning.
A typical Uplyme single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Most of our Uplyme jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Uplyme sits Exeter (28 mi), and we work the surrounding villages on the same week's diary.
What Uplyme builds usually need
- Seafront apartments — a regular brief in Uplyme
- 1930s coastal semis — a regular brief in Uplyme
- Harbourside conversions — a regular brief in Uplyme
- Guest-house retrofits — a regular brief in Uplyme
- Tourism lets — a regular brief in Uplyme
Built for Uplyme coastal residential and hospitality clients
Uplyme is a coastal town, so damp control, salt exposure and tight winter pour windows shape every brief. We work the diary around that — and around the holiday-let turnover that funds half the jobs here.
Garage Floor Screed in Uplyme — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Cemfloor systems for Uplyme
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Step-by-step for a Uplyme job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Latest jobs across Devon
Uplyme-area service radius
What backs our Uplyme work
Hundreds of square metres poured around Uplyme in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Uplyme screed questions, answered
Can you do garage conversions as well?+
Yes — full conversion floors with insulation, UFH and screed in one coordinated package across Uplyme and the surrounding area.
Can liquid screed take an EV charger and a car's weight in Uplyme?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Uplyme garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Uplyme site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Uplyme diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Uplyme garage, we form it in the substrate first, then screed at constant thickness.
Coverage across DT7
From Uplyme to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site