Renovation Screed · Devon
Renovation Screed for Trusham Builds
Renovation floors in Trusham rarely run true — old timber decks sag, original slabs slope, and threshold heights are tight. Liquid screed fixes all three in a single morning.
Get a fixed price for Renovation Screed for Trusham Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Renovation floors in Trusham rarely run true — old timber decks sag, original slabs slope, and threshold heights are tight. Liquid screed fixes all three in a single morning.
Where you're stripping back to a sound original slab in Trusham, we'll prep, prime and bond a thin liquid screed straight onto it from 30mm — no need to dig out.
Most of our Trusham jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Trusham sits Exeter (11 mi), and we work the surrounding villages on the same week's diary.
Trusham projects we see most
- Stone farmhouses — a regular brief in Trusham
- Barn conversions — a regular brief in Trusham
- Cottage extensions — a regular brief in Trusham
- Occasional new-build cottages — a regular brief in Trusham
- Agriculture — a regular brief in Trusham
Right fit for Trusham rural self-builders and farms
Trusham sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Renovation Screed in Trusham — how it works
Most Trusham renovations want UFH retro-fit. Liquid screed lets you wrap pipes in a thin build-up the original construction never planned for.
Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.
Specifications suited to Trusham builds
Cemfloor CT-C30-F6 (thin-section)
Where minimum depth matters more than maximum mass.
Cemfloor Therm
Retro-fit UFH in renovation builds.
Acoustic underlay
Critical for {town} flat conversions where impact noise is a concern.
Self-levelling overlay primer
For bonded thin-section pours over existing slabs.
How a Trusham pour runs
- 1
Site visit — inspect substrate, threshold heights, structural movement
- 2
Strip and prep, or prime existing slab
- 3
Insulation, UFH coordination and edge isolation
- 4
Pour, level and protect
- 5
Floor coverings once dry and signed off
Floors poured around Trusham
Nearby villages and towns
Proof from the Devon workload
Common Trusham build questions
Will it work with my new UFH retro-fit?+
Yes — Cemfloor Therm at 50mm above pipe gives you full UFH performance in a renovation build-up most original structures can accommodate.
Is liquid screed safe over a heritage property in Trusham?+
With proper edge isolation and movement joints, yes. We discuss any conservation-area or listed-building constraints up front.
Will the screed stick to my old skirtings?+
We fit edge isolation strip against every wall before the pour — no bonding to skirtings, no risk to plaster.
Can you screed over my existing concrete floor in Trusham?+
Usually yes — if the slab is sound we bond a thin liquid screed straight on top from 30mm. We'll assess the Trusham substrate at the site visit and price accordingly.
Can you do a single room rather than the whole house?+
Yes — single-room renovation pours are a regular run for us across Trusham, with movement joints at the doorway to isolate from neighbouring rooms.
What's the disruption like?+
Pump day is loud for a couple of hours. After that, the room is cordoned for 24-48 hours while the floor cures. We work clean and protect adjacent finishes.
Talk to a Trusham-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site