Underfloor Heating Screed · Devon

Cemfloor-Certified Underfloor Heating Screed Across South Molton

Liquid UFH screed in South Molton replaces the air gaps and voids that bog standard sand-and-cement leaves around pipes, lifting system response and cutting running costs.

Liquid screed work near Cemfloor-Certified Underfloor Heating Screed Across South Molton
Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Cemfloor-Certified Underfloor Heating Screed Across South Molton

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

Liquid UFH screed in South Molton replaces the air gaps and voids that bog standard sand-and-cement leaves around pipes, lifting system response and cutting running costs.

We pour Cemfloor Therm liquid screed over your UFH pipes at 50mm above pipe (typically 65-75mm total over insulation), giving full pipe encapsulation, fast thermal response and a finished surface flat to SR1.

Most of our South Molton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. South Molton sits Tiverton (20 mi), and we work the surrounding villages on the same week's diary.

EX36 access, routes and logistics

County

Devon

District

North Devon

Postcode

EX36

Nearest city

Tiverton (20 mi)

Nearest motorway

M5 (J27, ~20 mi)

Primary A-road

A361 (North Devon Link)

Local industries

NDLR distribution, agriculture

Common builds

Georgian high-street, new estates

Underfloor Heating Screed in South Molton — how it works

We pour Cemfloor Therm liquid screed over your UFH pipes at 50mm above pipe (typically 65-75mm total over insulation), giving full pipe encapsulation, fast thermal response and a finished surface flat to SR1.

The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.

Built for South Molton homeowners and contractors alike

South Molton runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.

Cemfloor systems for South Molton

Cemfloor Therm

Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.

PIR/Phenolic insulation board

70-150mm typical depending on build regs U-value target.

Edge insulation strip

Critical around UFH zones to allow thermal expansion.

Pressure-testing kit

Pipes held at 6 bar through the pour to flag any damage immediately.

Latest jobs across Devon

Self-build UFH pour near Tiverton
Self-build UFH pour near Tiverton
UFH screed laid over a coastal apartment in Exmouth
UFH screed laid over a coastal apartment in Exmouth
UFH screed in a kitchen-diner extension, Taunton
UFH screed in a kitchen-diner extension, Taunton

What backs our South Molton work

  1. 01Cemfloor-certified, fully insured, CDM-aware
  2. 02Coordinated with most South West UFH installers
  3. 03Pre-start meeting standard on every commercial job
  4. 04Local knowledge — we know the M5 (J27, ~20 mi) access window and A361 (North Devon Link) traffic patterns

South Molton screed questions, answered

Can you screed over wet UFH and electric UFH?+

Yes — Cemfloor Therm encapsulates both. Electric mat systems usually take a thinner cover; wet pipes need the 50mm minimum.

Will the screed crack as the UFH heats up?+

Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.

When can I switch the underfloor heating on in South Molton?+

On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold South Molton clients to the schedule.

What if a pipe leaks during the pour?+

Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.

Does liquid UFH screed improve EPC ratings?+

Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.

What depth of screed over UFH pipes do you recommend?+

Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.

Whether it's a single-room retrofit or a full homeowners and contractors alike build in South Molton, the goal is the same — one pour, laser-flat, ready to take coverings without fuss.

Cemfloor-certified work near South Molton

Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp