Garage Floor Screed · Devon
Cemfloor-Certified Garage Floor Screed Across South Molton
Across South Molton we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.

Get a fixed price for Cemfloor-Certified Garage Floor Screed Across South Molton
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across South Molton we screed garages from 30mm bonded over sound concrete up to 50mm unbonded with insulation underneath — both finish flat and accept resin coatings cleanly.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Most of our South Molton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. South Molton sits Tiverton (20 mi), and we work the surrounding villages on the same week's diary.
Why South Molton site context matters
County
Devon
District
North Devon
Postcode
EX36
Nearest city
Tiverton (20 mi)
Nearest motorway
M5 (J27, ~20 mi)
Primary A-road
A361 (North Devon Link)
Local industries
NDLR distribution, agriculture
Common builds
Georgian high-street, new estates
Garage Floor Screed in South Molton — how it works
A typical South Molton single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Built for South Molton homeowners and contractors alike
South Molton runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.
Cemfloor systems for South Molton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around South Molton



Proof from the Devon workload
- 01Cemfloor-certified, fully insured, CDM-aware
- 02Coordinated with most South West UFH installers
- 03Pre-start meeting standard on every commercial job
- 04Local knowledge — we know the M5 (J27, ~20 mi) access window and A361 (North Devon Link) traffic patterns
Common South Molton build questions
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the South Molton site clean and the floor protected with sheeting.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your South Molton garage, we form it in the substrate first, then screed at constant thickness.
Can liquid screed take an EV charger and a car's weight in South Molton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your South Molton garage usage.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your South Molton diary.
Can you do this on a single-garage budget?+
Yes — single-garage jobs are a regular run for us across South Molton. We'll give you a flat quote with no surprises.
Nearby villages and towns
Pin down a date for your South Molton pour, and we'll handle the rest — pump, mix, lay, level, protect, hand over.
Cemfloor-certified work near South Molton
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site
