Underfloor Heating Screed · Devon
Underfloor Heating Screed in Lapford
Across Lapford we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Talk to a Lapford-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Call 07791 51084907791 510849 WhatsApp usGet a fixed price for Underfloor Heating Screed in Lapford
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Lapford we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Lapford renovations.
Most of our Lapford jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Lapford sits Exeter (16 mi), and we work the surrounding villages on the same week's diary.
Built for Lapford homeowners and contractors alike
Lapford runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.
Why Lapford site context matters
County
Devon
District
Mid Devon
Postcode
EX17
Nearest city
Exeter (16 mi)
Nearest motorway
M5 (J31, ~19 mi)
Primary A-road
A377
Local industries
Ambrosia creamery, agriculture
Common builds
stone cottages, station-side new builds
Underfloor Heating Screed in Lapford — how it works
The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.
For Lapford UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.
Step-by-step for a Lapford job
- 1
UFH installer fits manifold, pipes and pressure-tests to 6 bar
- 2
We confirm edge insulation, DPM and pipe coverage depth
- 3
Pump and level the screed with pipes still under pressure
- 4
Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec
- 5
Floor coverings once moisture is signed off and commissioning is complete
Recent work near Lapford
Cemfloor systems for Lapford
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
Nearby villages and towns
FAQs from Lapford clients
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
When can I switch the underfloor heating on in Lapford?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Lapford clients to the schedule.
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
Do you fit the UFH pipes yourself?+
We work alongside your chosen UFH installer rather than fitting pipes ourselves — most Lapford jobs come with a heating sub-contractor already lined up, and we coordinate dates with them.
Trust points for a Lapford brief
Hundreds of square metres poured around Lapford in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Talk to a Lapford-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site